Extinguishing systems for control cabinets
Direct and automatic extinguishing where the fire starts
EXTINGUISHING SYSTEMS for control cabinets
Our innovative automatic extinguishing systems are optimally suited for protecting all types of control cabinets. Whether it concerns the targeted protection of individual cabinets or larger rows of control cabinets, we can offer the optimum solution for every application. Our aerosol fire extinguishers and fire extinguishing systems extinguish quickly and effectively and are harmless to people and machines. Already used in a wide variety of applications, our extinguishing generators provide reliable protection against class A, B, C and F fires. No piping is required, no need to seal the cabinets. Retrofitting is therefore possible without any problems, our systems do not have to be taken into account when planning the control cabinet. Our extremely compact extinguishers can also be housed in very narrow cabinets and only need to be wired. When it comes to fire detection, we can rely on proven components for technical fire protection. Whether smoke or temperature detectors and / or manual activation, everything is possible. It is also possible to connect to an existing fire alarm system and to set up a completely independent fire control panel.
Our aerosol fire suppression systems are certified by Europe's number one for fire protection: VdS
Advantages of our Aerosol Fire Suppression Systems
- The most effective fire protection systems
- Premium quality
- Absolutely reliable
- Does not deplete oxygen
- 100% environmentally friendly
- Suitable for fire classes A, B, C & F
- Cheaper than gas- and sprinkler systems
- 0% risk of leakage and loss of quality
- Space-saving installation
- Low maintenance costs
- Sustainable technology - up to 20 lifespan
- Professional installation and service team
- Suitable for protecting lithium-ion batteries
- VdS / TÜV certified
Our automatic fire extinguishers for control cabinets
Almost all of our automatic fire extinguishers and aerosol extinguishing generators are suitable for use in control cabinets. The choice of a particular unit primarily depends on the contents of the control cabinet or control room. Our smallest unit with 0.1 m3 capacity is suitable for installation in even the smallest control cabinet or switchboard. Our largest units are suitable for protecting entire switch rooms. A single unit can protect up to 79 m3. In addition, depending on the available space, we offer units with axial or radial outflow.
Our automatic extinguishing systems are 100% reliable and can work completely autonomously by means of an analog detection cable. In addition, it is possible to connect our fire extinguishers to almost all possible fire and smoke detectors and fire control panels. Unlike other automatic fire extinguishers, our aerosol generators are 100% reliable and do not cause collateral damage. After activation, our units extinguish the fire in a few seconds and what is left is just a little dust that is easy to rinse away. The aerosols remain floating in the room after activation and actively prevent re-ignition of the fire, even for hours after activation.
RSL Fire extinguishing systems
Without coolant
Axial & Radial Outlet
Only 73 g extinguishing agent per m3
VdS certified
- RSL 8
- RSL 80
- RSL 160
- RSL 225
- RSL 400
- RSL 700
- RSL 1000
- RSL 1400
- RSL 2800
- RSL 3500
RSL Fire extinguishing systems
With coolant
Axial Outlet / Nozzle
Also suitable for mobile applications
VdS, R107, IMO & TÜV certified
- RSL 20C
- RSL 160C
- RSL 200C
- RSL 500C
- RSL 1000C
- RSL 1500C
- RSL 3000C
- RSL 6300C
RSL Fire extinguishing systems
With coolant
Radial Outlet / Nozzle
Also suitable for mobile applications
- RSL 20CR
- RSL 100CR
- RSL 400CR
- RSL 400CR
- RSL 800CR
How does aerosol work as extinguishing agent?
The fire is detected by a fire detector and activated with electrical ignition, or detected and activated by fully autonomous heat detection. Upon activation the RSL Fire aerosol generator produces the extinguishing aerosol in a matter of seconds, and an endothermic reaction converts potassium bicarbonate into potassium carbonate, removing chemically oxidizing substances from the combustion process and extinguishing the fire. At the same time, additional heat is extracted from the combustion process. This extinguishes the fire in two ways and significantly reduces the chance of re-ignition. During the extinguishing process, no oxygen is removed, and the limited amount of byproduct, potassium carbonate, is environmentally friendly. More information about our extinguishing systems and extinguishing technology.
Request a Quote
Contact
Are you interested in our aerosol extinguishing systems and fire extinguishers? Request a quote or contact us.
RSL Fire
Walborg 3, 1082AM Amsterdam
Tel: +31 20 369 8676
Email: [email protected]